The controls – Audio Damage DubStation User Manual
Page 8
The Controls
1. The
INPUT DRIVE knob controls the level of the signal as it enters the plug-in. The range of the knob is -
80dB, which effectively turns the input signal off altogether, to +3dB, which provides a small amount of
boost. In most circumstances you can leave it at its default setting of 0dB, which passes the signal without
amplifying it. Manipulating this knob with either a hardware MIDI controller or your host sequencer’s
automation features is useful for creating echo effects on only certain hits in a drum part or the last word
in a vocal phrase: keep the knob turned all the way counter-clockwise, then quickly turn it up and back
down to let just the desired hit or word enter the delay line.