Alyseum AL-88c - Manual (Page 7)

AL-88c – User’s manual © - Revision 1.7
Page 7
5.3 Settings (Edit tab)
AL-88c settings are done via the CopperLan Manager (Editor tab)
1. Front Button - not available for this product.
2. Restore originals MIDI In connections – for standalone applications.
3. Save MIDI In destinations – for standalone applications.
4. Enable or disable the active sensing on MIDI Out 1.
5. Enable or disable the active sensing on MIDI Out 2.
6. Enable or disable the active sensing on MIDI Out 3.
7. Enable or disable the active sensing on MIDI Out 4.
8. Enable or disable the active sensing on MIDI Out 5.
9. Enable or disable the active sensing on MIDI Out 6.
10. Enable or disable the active sensing on MIDI Out 7.
11. Enable or disable the active sensing on MIDI Out 8.
The save is done automatically.
5.4 Firmware Upgrade software
Upgrading the firmware is done via the network.
This is done automatically through the CopperLan Manager via an internet connection.