Uncaged Ergonomics WorkEZ Light - Manual

WorkEZ™
For more information please visit: UncagedErgonomics.com
Or contact us: 240.583.0517 / [email protected]
Disclaimer :
Buyer accepts full liability for any injury or loss to themselves, their property, and anyone else at any time and from any cause while using this product.
Buyer expressly releases Uncaged Ergonomics and its agents from any liability for such loss or injury. In no event shall Uncaged Ergonomics or its agents
be liable for any direct, indirect, punitive, incidental, damages or injury whatsoever arising out of or connected with the use or misuse of its products.
I n t r o d u c i n g Wo r k E Z ™
Each joint is measured in 15° increments.
Joints lock in place every 15°.
To operate a joint, depress the button and
rotate the leg to the desired angle.
➪ Once the button is depressed, joints
rotate in a complete circle or 360°
➪ The joint is locked when the button is
extended. Only use WorkEZ™ when all
joints are locked.
MAKING LIFE FEEL BETTER
UncagedErgonomics.com
Wo r k E Z ™ L i g h t
Joint A
Joint B
Depress the button
to adjust the leg.
An extended
button means the
joint is locked.
Joint A
Joint B
Constructed with weight-saving components,
WorkEZ™ Light is built to go with you
wherever life leads. The solid, thin aluminum
panel has a smooth, brushed finish. The 2-
piece leg design decreases product height,
simplifies setup, and enhances portability.
G u i d e l i n e
Max load is 13 lbs.
Joints must be locked (extended) before use.
Before use, ensure that:
➪ All joints are locked (extended)
➪ The platform is level
➪ Both legs are adjusted identically and
evenly
➪ WorkEZ™ is stable
➪ The platform weight is centered over
the bottom leg
Tip: If WorkEZ™ tends to tip forward or
backward, rotate the bottom leg 180°
C o u c h / B e d T a b l e
When adjusting,
be wary of your
fingers.
Simplify life
with 1 multi-purpose stand