Panasonic MC-V7375 - Manual (Page 7)

A
CAUTION
DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as it can be damaged by the agitator as it revolves.
ATTACHMENTS
Wand
Dusting ^
Brush —
Upholstery Tool
Crevice
Tool
Raised
-J“
Tab Hose * »öw
The attachments should be conveniently positioned on the back and side
of the cleaner for easy access. Some of the attachments may
already be assembled. Assemble the hose and attachments
to the cleaner as follows:
hose
Holder-
Place the hose in back of the handle on the hose holder.
Attach the wand to the hose by aligning the two (2) raised tabs on the
wand with the “J” slots in the hose. After guiding the tabs along the
grooves, twist to lock in place.
Place the wand in the rear slot of the tool holder, twisting and
pushing down over the short hose to assure a good connec­
tion.
Hose
Store the dusting brush, and the upholstery toot in the rear of the
dust compartment in their proper locations. Place the crevice tool
into the front slot of the tool holder. Refer to the illustra­
tion in the PARTS IDENTIFICATION section for correct
attachment storage.
Dusting
Brush
Upholstery
Tool
Nozzle
Crevice
Tool
(Behind
Wend)
Short
Hose
I— Agitator (Underneath)
-
7
-