Awáchmei«assembly.t(^ls-on-board, Rvia, Attachmet – Panasonic MC-V5715 User Manual

Page 7: Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

?AWáCHMEI«ASSEMBLY.T(^ls-on-Board

■ . u .

CAUTION

DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as it can be damaged by the agitator as it revolves.

ATTACHMEt^

Dusting
Brush

—

Jjj*---------

Wands (2)

Raised

MJ.

Crevice

Tool

Wand ^ Tab

■^-rVia'

The attachments should be conveniently positioned on the side of the

cleaner for easy access. Assemble the hose arid attachments to the
cleaner as follows:

Place the hose in back of the handle on the hose holder. Attach the

wand to the hose by aligning the two (2) raised tabs on the wand
with the “J" slots in the hose. After guiding the tabs along the

grooves, twist to lock in place.

Place the wand in the front slot of the tool holder, twisting

and pushing down over the short hose to assure a good
connection.

Hose
Holder

Dusting
Brush

Store the other wand in the round rear slot of №e tool
holder. Insert the dusting brush Into the top of the wand

as shown.

Hose

Place the crevice tool into the rectangular rear slot of the tool

holder.

Refer to the illustration in the PARTS IDENTIFICATION section

for correct attachment storage.

Short

Hose

-----

Agitator

(Underneath)

- 7 -