Yamaha CINEMASTATION NX-C300 - Manual (Page 12)

Functional Overview
Front panel (DVR-C300)
m m
® ® ®
OSTANDBY/ON
- Turns the DVD receiver on, or set it to the standby
mode.
0 Disc tray
- Load up to 5 discs in the disc tray.
0
VOLUME
- Adjusts the volume level.
O INPUT
- Selects an input source or sets the priority level for
the audio input signals.
- Opens/closes the disc tray.
0PLAYXCHANGE
- Use to change discs not being played during
playback.
0>
- Exits an operation.
- DVD/CD: stops playback.
- TUNER: erases a preset radio station.*
/ II
- DVD/CD: starts/pauses playback.
- TUNER: starts preset radio station installation in
Plug & Play mode.
01^4^ / / ►►
- DVD/CD: searches backward/forward* or moves
to the start of a disc track
- TUNER: tunes the radio preset up/down.
® O Head phone jack
- Connects headphones.
0> Remote control sensor
- Point the remote control towards this sensor.
0 System display panel
0 DISC {1,2,3,4, 5)/LEDs
- Use to select and directly playback the preferred
disc.
- Each LED flashes green when the button is
selected.
^ = Press and hold the button for more than two seconds.