Petsafe Drinkwell® Outdoor Dog Fountain - Manual (Page 8)

www.petsafe.net 8
FOUNTAIN DISASSEMBLY & CLEANING
4) Remove the housing by gently pressing on each side of the housing
where it locks into the bowl. Lift the housing straight up and set aside
for cleaning, see Figure 6.
5) Remove the T-Tube and Outflow Tube from the bottom of the housing
and disassemble into two separate pieces, see Figures 7a and 7b.
Fig. 6
Fig. 7a Fig. 7b
Next, remove the foam filter and rinse thoroughly in fresh water
if you plan on reusing the filter after cleaning. Or discard in the
garbage, if you plan on replacing with a new foam filter.
To remove the pump, take the power adaptor and unthread (untwist)
the plastic locking collar by twisting to the left. Once completely
removed from the threads, pull the electrical cord away from the
adaptor and this will expose the two metal prongs. With the adaptor
detached from the electrical cord, pull the cord through the opening
on the inside of the bowl. Lift the pump and cord up from the bowl
and set aside for further cleaning, see Figures 8a and 8b.
6)
7)
Fig. 8a Fig. 8b