Hybrid Racing HR 06+ 8th Gen Civic Si Shifter Cables - Manual (Page 14)

14

Make sure when installing the shifter arm selector springs NOT to forget the washer on the small-
er spring.
 When reinstalling the shifter arm assembly do not forget to install the interlock bolt and clean the
old Honda bond off with a razor blade and recoat with new Honda bond on the base of the as-
sembly.
 Make sure you have the correct bushing insert for your model year in the cable endlink on the
transmission side, if you do not it will either have a lot of play or will not go on.
 When installing the Hybrid Racing shifter cables onto the shifter make sure that you have them
on the correct side, if you hear a clicking sound when moving the shift knob left to right you have
them backwards.
 When installing the Hybrid Racing shifter cables make sure that where the end links connect to
the shifter they are not in a bind or rubbing on one side and look just like the ones pictures in
FIG15.
 If cables do not actuate smoothly and consistently, they may be bent too tightly at some point.
Loosen bracket bolts holding the cables in place, adjust cables as necessary and retighten.
Trouble Shooting & FAQ’s
Tips and tricks to help you get it done!