Habey FW-1034 - Manual (Page 2)

www.habeyusa.com www.habeyusa.com
Install Guide
Unpack all package contents and inspect
each component. Make sure all included parts
and accessories are present.
Step 1 - Inspect Contents
Using a phillips head screw driver, remove the
four screws on the sides of the enclosure and
two screws on the rear side of cover.
Step 2 - Remove Top Cover
Plug the memoria dimm into the slot.
Step 3 - Mounting a 3.5” Drive
Step 4 - Install Memory
Mount the ears to the front side of the
enclosure by securing the ears to the side of
the enclosure with the included screws.
Remove the two drive trays from the
enclosure by removing the screws at the base
of the bracket.
Mount the 3.5” drive between the two drive
trays. Connect the HDD cable to the 3.5” hard
drive.
Your system is now ready. Connect the power cable to a power source and
press the power button on the front of the system.
Step 6 - Hardware Installation Complete
Mount the completed bracket to the enclosure.
Step 5 - Mounting