Habey BIS-6764 - Manual (Page 3)

www.habeyusa.com www.habeyusa.com
In order to connect the 2.5” HDD to the HDD
port correctly in the next step, make sure the
HDD head is on the opposite side of the top
mounting screw hole.
Your system is now ready. Connect the power cable to a power source and
press the power button on the front of the system.
Step 5 - Hardware Installation Complete
Mount the HDD on the tray with the four
screws in the small plastic package.
Make sure the HDD port in the right position,
and then connect the 2.5” HDD head to the
HDD port.
Finally, tighten the three screws on the
bottom cover.