Habey BIS-6564 - Manual (Page 3)

www.habeyusa.com www.habeyusa.com
Then mount the HDD bracket back onto the
backplane and fix it.
Your system is now ready. Connect the power cable to a power source and
press the power button on the front of the system.
Step 6 - Hardware Installation Complete
Place the cover as illustrated in the picture
and connect SATA cable to HDD marked in
lines.
Locate the included rack mount brackets
(ears). Mount the ears on the bottom cover
by securing the ears to the side of the
enclosure with the included screws.
Step 5 - Rack Mounting