Babyletto Bowery Bassinet Crib - Manual (Page 3)

page 3
STEP 1.
Assemble the side panels (B) to one of
the end panels (A) using Allen head
bolts (H2) and lock washers (H8) .
STEP 3.
Place the other side support bar (E) as
shown.
DO NOT OVERTIGHTEN.
* Make sure the groove at each side
panel faces the inside of the unit.
H2
H2
H2
H2
A. End Panel
B. Side Rail
E. Side
Support
Bar
STEP 2.
Place the center support bar (D) and
side support bar (E) as shown.
Then, slide in the bottom board (C) to
the groove at each side panel (B).
D. Center
Support Bar
E. Side
Support
Bar
C. Bottom Board
* Make sure the groove at side support
bar (E) faces the inside of the unit.
* Make sure the groove at side support
bar (E) faces the inside of the unit.
H8
H8
H8
H8