Canon 814XL User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Running Lock
This is a lock for continuous shooting, used in
remote control and single frame shooting as well
as with the self-timer. Set the main switch at 'RL'
and press the shutter lever to lock it. Then
shooting can be continued even after your finger
is removed. To release the running lock, set the
main switch to 'R'.
* The main switch can be set at 'RL' after pulling
the shutter lever for film drive. When the running
lock is used, the exposure indication window
lamp within the viewfinder goes out in order to
save power. If the f/number has to be checked,
please pull the shutter lever to light the lamp.
Remote Control
This mechanism allows to control the shutter
from a distance using the remote switch 60 or 3,
with which EE shooting is possible. This opera
tion can be adopted for single frame shooting as
well.
Preparations
1.
Set the main switch at 'OFF' and insert the
remote
switch
plug
into
the
remote
control
socket of the camera.
2.
Set the main switch at 'RL' and pull the shut
ter lever all the way. (The same position as run
ning lock.)