Canon 514XL User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Power Zooming
When the zooming switch is pressed during filming,

power zooming is accomplished. If you press the T

button, the subject will be enlarged and if W is

pressed, it will become smaller. When the motion
stops, it will not go any farther even if the switch is

kept pressed. Zooming time is about 8 seconds.

Manual Zooming

Although the power zooming speed is fixed, if you
would like to change the zooming speed you can use

manual zooming.

Use the zooming lever/macro setting lever to zoom,

but do not pull the macro setting lever unless you

wish to zoom into the macro range.

Within one movie, only one or two cuts of zooming
will be adequate for appreciation. Too much zooming

will make the movie difficult to look at.