Craftsman 358.792403 - Manual (Page 7)

OPERATION
KNOW YOUR EDGER ATTACHMENT
READ THIS OPERATOR’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER ATTACHMENT
Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual
for future reference.
Gearbox
BLADE
The BLADE is designed to cut sod.
Edger Blade
DEPTH ADJUSTMENT KNOB
The DEPTH ADJUSTMENT KNOB is
used to adjust the wheel for blade cut­
ting depth.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach­
ments to be installed. The optional
attachments are:
Cultivator........................ 358.79241
Blower............................. 358.79242
Pruner............ . ............. 358.79245
Brushcutter* ................... 358.79244
*not designed for use with electric
powerheads
^WARNING; Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal­
ling attachments, place the power-
head and attachment on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Couplei
Upper Shaft
LOOSEN
Attachment
TIGHTEN " Knob
Press and hold the locking/release
button.
Locking/Release
Button
^ Coupler
Attachment
Upper Shaft
3. While securely holding the upper
shaft, pull the attachment straight
out of the coupler.
INSTALLING ATTACHMENT
1. Remove the shaft cap from the at­
tachment (If present) and discard.
2. Position locking/release button of
attachment into guide recess of up­
per shaft coupler.