To prepare battery, To install attachments – Craftsman 917.374111 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO PREPARE BATTERY

NOTE: Your battery must be charged
before you can start your lawn mower.
1. Connect battery charger connector

(male) to harness connector (female).

2. Plug battery charger into 110 volt A.C.

outlet.

3. Leave battery charger connected for

24 hours before starting your engine
for the first time.

4. After charging, disconnect harness

connector (female) from battery char
ger connector (male).

Connect your battery charger to charge
battery as required.
IMPORTANT: The engine will not re
charge your battery.

At the end of the mowing season the

battery should be charged for 48 hours to
protect the battery during winter storage.

ACAUTION: Always disconnect the

engine connector (male) from the battery
connector (female) to prevent accidental
starting when transporting or storing your
lawn mower after the season.

TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to be

used as a mulcher. To convert mower to
bagging or discharging, see “TO CON

VERT MOWER” in the Operation section
of this manual.

Battery charger

Charger

Harness

connector

(male)

(female)

Battery

box

Engine connector (male