Assembly – Craftsman 486.24545 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

CARTON CONTENTS

1. Mount Bracket Assembly
2. Switch with Wiring
3. Linear Actuator

TOOLS REQUIRED FOR ASSEMBLY

(2) 9/16" Wrenches or Adjustable Wrenches
(2) 3/4" Wrenches or Adjustable Wrenches

PREPARING THE SLEEVE HITCH

• Remove the bolt and nut that attach the lift link to

the sleeve hitch frame. Remove the handle and the

pivot brackets from the sleeve hitch frame. See

figure 1.

ATTACHING THE ELECTRIC ASSIST KIT

• Attach the mount bracket assembly to the sleeve

hitch frame using four 3/8" x 1" hex bolts and 3/8"
nylock hex nuts. See figure 2.