beautypg.com

How to use your lawn mower engine speed, To convert mower – Craftsman 917.388111 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

■I

I

The operation of any lawn

0

SSES "1 mower can result in foreign

objects thrown into the

eyes, which can result in

■H severe eye damage. Always

wear safety glasses or eye shields while

operating your lawn mower or performing
any adjustments or repairs. We recom­

mend a standard safety glasses or wide

vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED
Engine speed was set at the factory for

optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

ACAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the
risk of blade contact injury. Do not under

any circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.
• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start
and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels

for high cut, adjust cutting height to suit

your requirements. Medium position is
best for most lawns.
• To change cutting height, squeeze ad­

juster lever toward wheel. Move wheel

up or down to suit your requirements. Be

sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when

plate tab inserts into hole in lever. Also, 9-
position adjusters (if so equipped) al low lever
to be positioned between the plate tabs.

LEVER BACKWARD

Plate tab

TO LOWER MOWER

LEVER FORWARD TO RAISE MOWER Lever

TO CONVERT MOWER
Your lawn mower was shipped ready to be

used as a mulcher. To convert to bagging
or discharging:

REAR BAGGING

• Lift rear door of the lawn mower and

place the grass catcher frame hooks
onto the door pivot pins.

To convert to mulching or discharging

operation, remove grass catcher and
close rear door.

Pivot pins

Grass

catcher

handle

Catcher frame hook

SIDE DISCHARGING
• Rear door must be closed.
• Open mulcher door and install dis­

charge deflector under door as shown.

• Mower is now ready for discharging

operation.

• To convert to mulching or bagging opera­

tion, discharge deflector must be removed
and mulcher door must be closed.

SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR LAWN MOWER

FOR MULCHING -
1. Rear door closed.

2. Mulcher door closed.

FOR REAR BAGGING -
1. Grass catcher installed.

2. Mulcher door closed.

FOR SIDE DISCHARGING -
1. Rear door closed.

2. Discharge deflector installed.

ACAUTION: Do not run your lawn mower

without rear door closed, clipping deflector

or approved grass catcher in place. Never

attempt to operate the lawn mower with the

rear door removed or propped open.

Install

discharge
deflector

388111-es-412691 rO.indd 8

2/23/2007 10:59:49 AM