Craftsman 315.11910 - Manual (Page 3)

GENERAL SAFETY RULES
m WARNING - Read all instructions. Failure to
follow all Instructions listed below may result In
electric shock, fire and/or serious Injury, The term
“power tool” In all of the warnings listed below
refers to your malns-operated (corded) power tool
or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
■ Keep work area clean and well lit. Cluttered or dark
areas Invite accidents.
■ Do not operate power tools in explosive atmo­
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may Ignite the dust or fumes.
■ Keep children and bystanders away while operat­
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
■ Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock,
■ Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There Is an Increased risk of electric shock If your body
Is earthed or grounded.
■ Do not expose power tools to rain or wet condi­
tions. Water entering a power tool will Increase the risk
of electric shock,
■ Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords Increase the risk of
electric shock,
■ When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of elec­
tric shock,
■ Use battery only with charger listed.
MODEL
BATTERY PACK
(Li-ion)
CHARGER
315.113740
(130285003,
130285006)
(Multi-Chemistry)
315.259260
■
315.113710
(130156001)
(140351001)
315.119100
BATTERY PACK
(Ni-Cd)
315.259260
(140351001)
■
1425301 (S11041)
130279003,
130279005
315.115730
(140301003)
■
(Item No. ail375) 315.115720
(140301001)
PERSONAL SAFETY
■ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of Inattention while operating power tools may
result In serious personal Injury.
■ Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appro­
priate conditions will reduce personal Injuries.
■ Avoid accidental starting. Ensure the switch is in
the off-position before plugging in. Carrying power
tools with your finger on the switch or plugging In
power tools that have the switch on Invites accidents.
■ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result In personal
Injury,
■ Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool In unexpected situations.
■ Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry, or long
hair can be caught In moving parts.
■ If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
■ Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
Into air vents.
■ Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool In unexpected situations.
POWER TOOL USE AND CARE
■ Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which It was
designed.
■ Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch Is dangerous and must be
repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous In the hands of untrained
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts, and any
other condition that may affect the power
tool’s