Assembly – Craftsman 536.772101 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

HOW TO RAISE THE HANDLE

Loosen the

knobs

and raise the upper

handle to the upright position. See

Figure 2.

Tighten the

knobs.

Make sure the

knobs

are to the outside of the handles

as shown in Figure 2.

Insert the end of the

control rod,

from

RIGHT to LEFT, through the hole in the

front wheel arm.

Attach with

hair pin

found in parts bag. See Figure 3.

Push down on the handle to tilt the unit

back.

5. Insert the other end of the

control rod,

from RIGHT to LEFT, through the hole in
the

depth control lever

and fasten with

hair pin.

See Figure 4.

6. Move the

depth control lever

forward to

the STARTING and TRANSPORT posi
tion.

7. Remove any packing material from the

bottom of the unit.

8. To attach the

recoil starter rope

to the

rope guide,

twist the

recoil starter rope

through the

rope guide.

See Figure 5.

Front

Wheel Arm

Hair Pin

Control

Rod

F-001101M

Figure 3