Craftsman 486.24623 - Manual (Page 2)

A
Any powerequipmentcan cause injury if operated improperly
or if the user does not understand how to operate the
equipment. Exercise caution at all times, when using power
equipment.
• Refer to your tractor owners manual for "Rules For
Safe Operation".
A
Look for this symbol to point out important safety
precautions. It means-Attention!! Become
alert!! Your safety is Involved.
J
TOOLS REQUIRED
(1)
9/16" Wrench
(1) 1/2" Wrench (for heat shields)
A
CAUTIONI Muffler is hot! Allow engine to
cool down before proceeding with bumper
installation.
Ref. Part No. Qty. Description
A 48894 2 Self Threading Screw, 3/8-16 x 1-1/2'
B 43062 2 Hex Bolt, 3/8-16x1-1/2"
C 43001 2 Hex Bolt, 3/8-16x1"
D 44742 4 Plug
E 48866 2 Pivot Spacer
F 1643-60 2 Plastic Grip
G 43070 4 Washer, 3/8"
H 43003 4 Lock Washer, 3/8"
1. Left Mounting Bracket
2. Right Mounting Bracket
3. Locking Lever
4. Bumper
#25037
#25038
#64862
#646146 (71-246211)
#646145 (71-24622)
#646140 (71-24623)
STEP1: (SEE FIGURE 1)
• Place cardboard on work surface to protect painted
parts from scratches.
• Remove hood from tractor using instructions in your
tractor owner's manual. Place hood on cardboard or
on a mat to protect paint.
• If your tractor has a heat shield shaped like the one in
figure 1, temporarily remove it.
IMPORTANT: Be sure to reattach the heat shield after
bumper is installed.
STEP 2: (SEE FIGURE 2)
• Place plug (D) on a work bench or solid table and
push end of bumper down onto plug. Repeat for all
four plugs.