Craftsman 917.272068 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ACCELERATION TEST-

6. Move throttle control lever from slow to

fast position. If engine hesitates or dies,
turn idle fuel adjusting needle out

(counterclockwise) 1/8 turn. Repeat test

and continue to adjust, if necessary, until

engine accelerates smoothly.

High speed stop is factory adjusted. Do
not adjust - damage may result.
IMPORTANT: Never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous. If you think the
engine-governed high speed needs
adjusting, contact a Sears or other qualified
service center, which has proper equip
ment and experience to make any
necessary adjustments.

Cable

Clamp

Screw

Lever

Idle Speed

Adjusting
Screw

Idle Fuel

Adjusting
Needle