Craftsman 358.792430 - Manual (Page 7)

NOTE: It may be necessary to relo­
cate the shoulder strap clamp on the
shaft for proper balancing of unit.
HARNESS
ADJUSTMENT
FOR BALANCE
4 - 1 2
inches
above
ground
30 inches
OPERATION
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the Illustrations with your unit to familiarize
yourself with the location of various controls and adjustments. Save this manual for
future reference.
Hanger
Blade
BLADE
The BLADE Is designed for cutting
grass, weeds, and brush up to 1/2 inch
in diameter. BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach­
ments to be installed. The optional at­
tachments are:
Edger.......................... 358.792400
Cultivator.....................358.792410
Blower.........................358.792420
WARNING: Always disconnect
powerhead spark plug before remov­
ing or installing attachments.
REMOVING BRUSHCUTTER AT­
TACHMENT {OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or instal­
ling attachments, place the powerhead
and attachment on a flat surface for
stability.