Check tire pressure, Check deck levelness, Check for proper position of all – Craftsman 917.25650 User Manual
Page 9: Check brake system, Assembly, Checklist
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
CHECK TIRE PRESSURE
The ti res on your tractor were overinflated at the factory for
shipping purposes. Correct tire pressure is important for
best cutting performance.
" Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS" on page 3 of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing should be properly
leveled. See "TO LEVEL MOWER HOUSING" in the
Service and Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL
13 d I "T*C?
EniiP Ew Lw
I
See the figures that are shown for replacing motion and
mower biade drive belts in the Service and Adjustments
section of this manual. Verify that the belts are routed
correctly,
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments section of this
manual.
/CHECKLIST
BEFO RE
YO U
O PERATE
AND
ENJO Y
YO UR
NEW
TRACTO R. W E W ISH TO ASSURE THA T YO U RECEIVE
THE BEST PERFO RM ANCE AND SA TISFACTIO N FRO M
THIS Q UALITY PRO DUCT.
PLEASE REVIEW THE FO LLO W ING CHECKLIST:
/ All assembly instructions have been completed,
/ No remaining loose parts in carton.
/ Batteiy is properly prepared and charged. (Minimum
1 hour at 6 amps),
/ Seat is adjusted comfortably and tightened securely.
/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory),
/ Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
/ Check wiring. See that all connections are still secure
and wires are properly clamped.
W HILE LEARNING HO W TO USE YO UR TRACTO R, PA Y
EXTRA ATTENTIO N TO THE FO LLO W ING IM PO RTANT
ITEM S:
/ Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline,
/ Become familiar with all controls - their location and
function. Operate them before you start the engine
/ Be sure brake system is in safe operating condition.