Craftsman 358.792401 - Manual (Page 7)

5. Position the handiebar as shown,
ensuring the handlebar is posi­
tioned on the handlebar clamp be­
tween the arrows on the handlebar
deca!-
6. Retighten handlebar by turning
clamp knob clockwise until handle­
bar is secure and stationary in
clamp (clamp knob cannot be over­
tightened).
KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER ATTACHMENT. Compare the illustrations with your attachment to familiarize
yourself with the location of the various controis and adjustments. Save this manual
for future reference.
Gearbox
BLADE
The BLADE is designed to cut sod.
Edger Blade
DEPTH ADJUSTMENT KNOB
The DEPTH ADJUSTMENT KNOB is
used to adjust the wheel for blade cut­
ting depth.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach­
ments to be installed. The optional
attachments are:
Cultivator............................. 358.792410
Blower................................ 358.792421
Brushcutter......................... 358.792441
^WARNING: Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or instal­
ling attachments, place the power-
head and attachment on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
Lower
Attachment
TIGHTEN Knob
2. Press and hold the locking/release
button.
Locking/Release
Button ^
/ Coupler!
Lower Attachment
3. While securely holding the upper
tube, pull the attachment straight
out of the coupler.