M to attach the tv to a kitchen cabinet – Sony KV-9PT60 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
® Push the base in the direction of the arrow © until the two rear
claws on the slider touch the back of the square-holes on the
bottom of the TV.
@ To lock the bracket and the TV, pull the slider in the direction of
the arrow @ while holding up the lever without moving the
base.
4
You can rotate the TV about 60° in either direction.
m
To attach the TV to a kitchen cabinet
To install the TV to a kitchen cabinet, attach the supplied shelf
installation bracket using the attachment parts shown below. The
bracket attachment instructions differ depending on the cabinet type
(flush or overhanging). Follow the instructions that match your cabinet
type.
Lay the supplied paper pattern on the base of the cabinet (inside or
outside), to ensure the proper 4 inches (101.4 mm) distance between the
wall and the bracket. Drill 4 holes (diameter: 9/32 inches, 7 mm) where
indicated on the pattern. Attach the shelf installation bracket as shown
on the following pages.
6EN
Setting up