Back panel (sat-a3), Appendix: other information 79 – Sony SAT-A3 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Back Panel (SAT-A3)
Connector
Description
Cable Type
SATELLITE IN
Connects to the LNB on the satellite antenna.
Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
LOW SPEED DATA
Allows you to connect your DSS receiver to new technologies, as they are
introduced. Additional accessories may be required.
Depends on future
applications
(D-sub 9 pin)
CONTROL-S IN/
S-LINK
Allows you to pass on remote control signals to another Sony infrared-
controlled audio or video component.
Audio mono or stereo
miniplug
VCR CONTROL
Sends IR signal from DSS to VCR. Allows the DSS receiver to
automatically control your VCR's recording functions when you record a
program.
Audio mono miniplug
RF REMOTE
Connects to the RF antenna.
RCA-type
AUDIO (R)/(L)
OUT
Connects your DSS receiver to the right and left audio inputs of your
audio or video component.
Audio (2)
(RCA-type)
VIDEO OUT
Connects your DSS receiver to your TV or VCR's video input.
Video
(RCA-type)
S-VIDEO OUT
Allows you to connect your DSS receiver directly to your TV (if your TV
has S-VIDEO IN).
S-Video
(4-pin mini DIN)
CH3/CH4 Switch
When you use an RF connection, this setting determines the TV channel
on which programs from the DSS receiver can be viewed.
VUF/UHE IN
Allows you to connect your DSS receiver to your normal (terrestrial) TV
or cable TV service.
RG-59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHF OUT
Connects to your TV or VCR.
RG-59 Coaxial
(75-ohm/F-type)
TEL LINE
Connects your DSS receiver to a telephone jack. This allows you to order
pay-per-view programs.
Telephone (RJ-11)
AC IN
Connects your DSS receiver to a 120V AC outlet.
AC
Appendix: Other Information 79