Cisco 7960G User Manual
Cisco Phones
![background image](/manuals/63042/1/background.png)
B-1
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
A P P E N D I X
B
Feature Support by Protocol for Cisco Unified IP
Phone 7960G and 7940G
This appendix provides information about feature support for the Cisco Unified IP Phone 7960G and
7940G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 7.0.
provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone 7960G and 7940G Phone Guide for Cisco Unified Communications Manager
7.0.
This guide is available at this URL:
The specific sections that describe the features in the phone guide are referenced in
Table B-1
Cisco Unified IP Phone 7960G and 7940G Feature Support by Protocol
Features
Cisco Unified IP Phones 7960G, 7940G
For More Information
SCCP
SIP
Calling Features
Abbreviated Dialing
Supported
Not supported
“Basic Call Handling—Placing a Call: Additional
Options”
Auto Answer
Supported
Supported
“Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Barge (and cBarge)
Supported
Not supported
“Advanced Call Handling—Using a Shared Line”
Busy Lamp Field (BLF)
speed dial
Supported
Supported
“Advanced Call Handling—Using BLF to
Determine a Line State”
Call Back
Supported
Not supported
“Basic Call Handling—Placing a Call: Additional
Options”
Call Display Restrictions
Supported
Supported
“Basic Call Handling—Forwarding Calls to
Another Number”
Call Forward All
Supported
Supported
“Basic Call Handling—Forwarding Calls to
Another Number”
Call Forward Busy
Supported
Supported
“Basic Call Handling—Forwarding Calls to
Another Number”