Sony CDP-670 - Manual (Page 13)

Tips on Editing Tapes
The following functions are convenient for editing your own tapes.
Fading Out at the Desired Time
—Time Fade
If you want to start the play fading in Ì
You can have the play fade out at the end by designating the
play duration.
You can use this function in any play mode.
1 Press EDIT/TIME FADE twice during stop.
“FADE” is displayed in the window.
2 Set the desired play duration, using either the
buttons or numeric buttons.
a) !/►►—Useful when using commercial tapes (46-, 54-,
60-, and 90-minute tapes).
Each time you press or the play duration for one
side of the tape is displayed as follows.
: 2 3 - 2 7 - 3 0 - 4 5 (min.)
: 4 5 - 3 0 - 2 7 - 2 3 (min.)
You need not press buttons for seconds, unless required.
(Designate seconds with
if you want.)
b) Numeric buttons (1 -10)—Useful when setting the time as
you want.
You need not press buttons for seconds, unless required.
3 To start play, press ►!!.
Play starts to fade out 5 seconds before the time set, and
the unit enters the pause mode.
Inserting a Blank Space between Selections
—Auto Space
Set the desired play duration, following the step 1 and 2
above.
1 Press II.
The unit enters the pause mode.
2 Press FADER once.
“FADE” flashes in the window, and play fades in for 5
seconds.
To resume play after fading out
Press ► II (II) or FADER on the remote commander.
(Pressing FADER starts the play fading in.)
To cancel time fade
Press ■ or
Time fade is also cancelled when
-
or is pressed during play.
- Other play mode buttons are pressed.
Fading in/Fading out
You can have the play fade in and fade out for 5 seconds
To end the play fading out
Press FADER when you want to start fading out.
“FADE” flashes in the window, and play fades out for 5
seconds and enters the pause mode.
To restart the play fading in
Press FADER.
“FADE” flashes in the window, and play fades in for 5
seconds.
You can insert a 3-second blank space between each
selection. The blank space enables you to locate selections
when using a tape deck with the automatic selection search
function.
Before starting play, press AUTO SPACE so that “SPACE” is
displayed in the window.
A blank space of approximately 3 seconds will be inserted
between each selection.
To cancel the auto space function
Press AUTO SPACE so that “SPACE” disappears from the
window.
To display the time remaining until the time set
Press TIME twice. In the shuffle play mode, however, the time
remaining until the fade-out time is not displayed.
13