Sony GV-300 - Manual (Page 26)

Using Index — to Find the Desired Scene Quickly
['Hi ^nd a titiliid íitdÜt—Index Sesrch
7ZH]
When you know the location or chapter number of the desired index, you can designate a
number to find the desired pari of the tape.
1
Press the INDEX MODE bunon
once during playback or the
playirack pause mode.
iiNoexjioog)
The unit enters the index standby
mode.
2
Press INDEX - / + button
repeatedly until the desired
index number appears on the
screen.
The tape is rewound or fast for­
warded to the designated index
number position, then playback
starts.
b
[g ConventtomN index
Example: designating the second index in
the reverse direction
a
1
playback rewind
current position
INDEX
SEARCH 0
STANDBY
Determine the number of indexes between
the current position and the desired index.
Select the appropriate number.
Press + for t> (forward)direction, - for <3
(reverse) direction.
INDEX
SEARCH 2
CHAPTER
SEARCH 7
0
INDEX
CHAP. 3
When playback starts, the indication will
disappear after about 10 seconds.
I
Prerecorded Index lor softisere
Example: designating chapter number 7
current position
current
chapter number-
CHAPTER
SEARCH 1
STANDBY
-^HAP. 1 ^
Select the chapter number referring to the
number on the jacket of the cassette tape.
Press + for a higher number, and - fora
lower number.
c>
When playback starts, the indication disap­
pears after about 10 seconds.
To correct the chapter or Index number
When the "CHAP” or "INDEX" indications are displayed, you can correct the number with the
INDEX -/+ button. Iridex search does not function if an interval between indexes is less than two minutes. Leave an
interval of at least two minutes between indexes.
50
Even with a video software which has prerecorded indexes, the indication is "INDEX SEARCH”
until the tape is played back.
51