Sony CCD-TR9 - Manual (Page 45)

Connecting to a TV via a VCR
You can connect the camcorder to a TV via a VCR.
When your TV is
without video/
audio inputs
TV
When your TV has
video/audk) inputs
1
Disconnect the antenna connection between
the TV and the VCR, and connect the RFU
adaptor (suppiied) to the VHF/UHF input on
the TV and VHF/UHF output on the VCR.
Siide iN/OUT on the camcorder
to OUT.
Set the channei seiector on the RFU adaptor (and
your TV channeO to 3CH or 4CH of the VHF channei, 3CH4|Ql]^4CH
whichever is not active (vacant) in your area.
Connect the camcorder to the VCR using the appropriate A/V connecting
cabie.
Siide iN/OUT on the camcorder to OUT.
Set the input seiector of the VCR to LiNE, if availabie.
Set the TV/VCR seiector on the TV to VCR or seiect the XH or 4CH of the
VHF channei.
Chapter 3: Advanced Operation
45