To stop recording, Recording from a vcr or tv – Sony CCD-TR930 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a VCR or TV
You can record a tape from another VCR or a TV program from a TV that has audio/
video outputs. Cormect the camcorder to the VCR or TV.
(
1
)
While pressing the small green button on the POWER switch, slide it to VTR.
(
2
)
Press REC # and the button on the right together at the point where you want
to start recording.
In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks
automatically work as input jacks.
If your VCR or TV has an S video jack, cormect using the S video cable (not supplied)
[a]
to obtain a high quality picture.
If your VCR or TV is a monaural type, cormect only the white plug for audio on both
the camcorder and the VCR or TV.
If you are going to connect the camcorder using the S video cable (not supplied) [a], you
do not need to connect the yellow (video) plug of the A/V connecting cable
[b].
To check the picture from a VCR or TV before recording
Press II after pressing
9
.
You can check the picture in the viewfinder.
To stop recording
Press □.
44