Dell PowerVault ML6000 - Manual (Page 276)

Chapter 12 Installing, Removing, and Replacing
Adding 9U Library Expansion Modules to an Existing Library
Dell PowerVault ML6000 User’s Guide 276
6
Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library on page 212.
7 Power on the library.
8
Reconfigure the library, including applying the new COD license
key, using the operator panel or Web client.
9
Recreate any partitions you deleted prior to installing the module.
1 Parking tab in “unparked” position