Advanced settings, Registering a handset – GE dect 6.0 User Manual
Page 67
Advanced settings
63
4. Press
again to confirm.
NOTE: All settings under the ANS SYSTEM, BLOCK LIST, PROGRAM
DND, CLOCK & ALARM, SETTINGS, HANDSET TONES, BASE TONES
and ADV SETTING and menus in the handset will be restored to
default settings, the redial list and call log will also be cleared.
Registering a handset
The telephone system can support up to a total of 5 cordless handsets.
Handsets that were included with your main base are pre-registered.
To add or re-register a handset:
1. Press
on the cordless handset when the handset shows
REGISTER YOUR HANDSET.
2. The handset then shows PRESS LOCATOR KEY FOR 5 SEC.
3. Press and hold the button on the telephone base for 5 seconds
until a beep sounds.
The cordless handset screen shows REGISTERED and a beep sounds
when the registration is successful.
NOTES:
1. An error tone will sound if the registration is not successful.
2. This product is compatible with model 30520
accessory handsets only. For information
on how to purchase accessory handsets, please visit our website at www.gephones.com
10:30
PM
11/20
RESET
CONFIRM?