BlueAnt Q1 Voice Controlled Headset - Manual (Page 33)

33
The Q1 Played a Beep or Tone: What Does It Mean?
The Q1 plays beeps and sounds to let you know when certain things happen. If the Q1 plays a beep or
other sound, one of the following has happened:
• If the battery level drops to very low, then the Q1 will play a low battery sound and automatically
switch itself off.
• If you go out of range of your phone, then the Q1 will play a sound to indicate that it has lost the
connection to your phone.
• If you have muted the audio on your call then you will hear a beep every 20 seconds to remind
you that the audio is muted.
• The Q1 plays a beep when you end a call.
• The Q1 plays a beep when you are turning the volume up or down and you reach the maximum or
minimum volume level.
• If you have turned off the voice control, then the Q1 will also beep when your phone connects or
disconnects, when you enter pairing mode, and when you press the BlueAnt button.
• The Q1 plays a call waiting sound if you receive an incoming call while you are on a call. You can
use the Q1 buttons to answer the call (see "Multiple Calls (Call Waiting)" (page 19) for more
information).
Turning Off the Q1 Light
By default, the BlueAnt button will flash blue at regular intervals to indicate that the Q1 is switched
on. If you prefer, you can switch this light off. You might want to turn off the light if you find it
distracting, for example if you are wearing the Q1 while driving at night.
When you turn the LED off, it will still light up when you turn the Q1 on and off, but not at other times.
To turn the light off or back on again, go to the "Settings Menu" and use the "LED Light" command.