Great Plains 6 Foot Drill Native Grass 3P605NT - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
202-448M
6 Foot Drill
Native Grass Option
• 605NT
• 3P605NT
General Information
Assembly Instructions
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
3/22/2005
Before You Start
Beginning on page 10 are detailed listings of parts
included in the native grass option packages. Use
the proper list to inventory parts received.
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
Walkboard Removal
Refer to Figure 1
1. Remove slow moving vehicle and bracket as-
sembly (1). Save assembly and hardware (2)
for later use.
2. Remove steps (3). Save steps and hardware
(4) for later use.
3. Take off walkboard (5) by removing hardware
(6). Discard walkboard and hardware.
18660
Figure 1
Walkboard Removal
These instructions explain how to install the native
grass option. The native grass option mounts be-
hind the main drill box and allows you to plant very
fine, fluffy seeds.
These instructions apply to:
202-408A 605NT Native Grass Assembly
202-416A 3P605NT Native Grass Assembly
202-411A 605NT Native Grass w/SGS
202-447A 3P605NT Native Grass w/SGS
Manual Information
Refer to the 6 foot drill operator’s manual for de-
tailed information on safely operating, adjusting,
troubleshooting and maintaining the native grass
option. Refer to the parts manual for part
identification.
Drill Manual Part Numbers
151-061M 6’ No-Till Drill Operator’s Manual
151-061P 6’ No-Till Drill Parts Manual