Great Plains Nutri Pro Wing Pivot - Manual

Part Lists Great Plains Manufacturing, Inc. 1
© Copyright 2010 Printed 07/13/2011 Part Lists 407-703M
Nutri Pro Wing Pivot Update Manual
Nutri-Pro
®
Fertilizer Applicators
General Information
These instructions explain how to install a wing pivot
hinge update kit. It takes one kit (includes a left and a
right hinge) to update one implement:
Tools Required
• basic hand tools
• two jack stands
• right angle grinder
• welder capable of welding 3/8” material, welding visor
and gloves
• Great Plains green spray paint (p/n 821-001C)
Work Location
Move the implement to a location with:
• flat, smooth non-flammable surface free of com-
bustibles
• adequate illumination
• clear surface beneath for recovery of any falling
or dropped parts
Sharp Object Hazard:
Be careful working near discs and tines. Edges may be sharp.
Notations and Conventions
Call-Outs
Null4: When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
Kit Kit Description
407-697A NP Wing Pivot Update
Figure 1
Nutri-Pro® Hinge Update Kit
32203
Nul l4: “Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Left, Right,
Front, Back, Up, Down.
to Two-digit callouts in the range 11 to 19 refer-
ence new parts from the list on page 5.
U
D
L
R
B
F
11 19