Great Plains 80303P - Manual (Page 3)

3 4/8/14 Planter Digital Acre Counter 402-147M
Great Plains Mfg., Inc.
Assembly
■
5. Use control box to locate holes on plas-
tic cover. Drill 3/16-inch holes in cover.
Mount control box on plastic cover
through drilled holes. Use hardware in
this order: #10 hex-flange screws, flat
washers, control box, plastic cover, lock
washers and flange nuts.
6. Replace plastic cover on drive tower
and plug control-box lead into sensor
lead.
7. Refer to the manual from Vansco en-
closed in this kit for setup and opera-
tional instructions.
18031
18032
18033