K-array KK102 - Manual (Page 21)

REV. A
KK52/KK102
21
KK102
Acoustics
Speakers power handling 400 W (AES)
Max power 800 W 1
Impedance 8Ω or 32Ω (selectable)
Frequency range 150 Hz - 20 KHz.
SPL 1W / 1mt 98 dB 2
Maximum SPL 124 dB continuous - 130 dB peak
Coverage
Horizontal 110°
Vertical 7°- 35° (selectable)
Crossover
Type External Crossover required
Frequency High pass @150 Hz, 24 dB/oct suggested minimum
Transducers
Full range 16 x 2” Neodymium magnet with 0.75” voice coil
Power Audio Input
Connectors 2 x 4-pin Speakon
Wiring 1+ 1- (signal IN & LINK); 2+ 2- (through)
Selection Switch
Vertical pattern Spoot - Flood
Impedance 8Ω - 32Ω
Physical
Dimensions 8.1 x 100 x 5.9 cm (3.19” x 39.4” x 2.32”)
Weight 4,8 Kg (10.58 lbs)
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing
products without previous notice. Present systems may differ
in some respects from those presented in this brochure.