beautypg.com

Care and maintenance – Human Touch PC-050 Perfect Chair User Manual

Page 7

background image

humantouch.com

10

11

To keep your product working and looking its best, please follow
these simple care guidelines.

care and

maintenance

Cleaning:

1. Do not use benzene, thinner or any other solvents on your chair.

2. Remove dust on the backrest or armrest with a vacuum.

3. If the backrest or armrests become soiled, wipe with a damp cloth, then a dry cloth.

4. Common upholstery cleaners may be used for tough stains.

Fabric Care:

To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. SofSuede

®

products can also be brushed with a suede brush. Wipe with a slightly damp cloth as necessary. For

tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down

occasionally with a leather furniture cleaning solution.

WARNING:

Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior
to using the solution on the entire product surface.

Maintenance and Repair:

1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.

2. Your chair should only be serviced by an authorized service center.

Use and Storage Environment:

1. When not in use for a long period of time, we recommend that the chair be covered and that the unit be placed in an
environment free of dust and moisture.
2. Do not store near heat or open flame.
3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
4. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%;
excessive humidity will damage the mechanics.

Miscellaneous:

1. Foreign objects should not be inserted in the recline suspension wheels or other moving parts.
2. Care should be taken not to overload the unit.