Watts Fleck 2850 Brass Valve - Manual (Page 2)

MODEL 2850
Job Specification Sheet
Printed in U.S.A.
* JOB NO. __________________________________________________________
* MODEL NO. _______________________________________________________
* WATER TEST ______________________________________________________
* CAPACITY PER UNIT________________________________________________
* MINERAL TANK SIZE DIA.___________________ HEIGHT _________________
* BRINE TANK SIZE & SALT SETTING PER REGENERATION:
_________________________________________________________________
Page 2
* 2850 CONTROL VALVE SPECIFICATIONS
1) Type of Timer (see pages 16, 17, and 18)
A) 7 day or 12 day
B) * 625 to 10,625 gallon meter or
* 3,125 to 53,125 gallon meter
* Other _______________________________________
C) Meter Wiring Package
1) System #4 - 1 tank; 1 meter; immediate or delayed regeneration
2) System #5 - 2 tanks; 2 meters; interlock
3) System #6 - 2 tanks; 1 meter; series regeneration
4) System #7 - 2 tanks; 1 meter; alternator
2) Timer Program Settings (see page 18)
A) Backwash ____________________________________ min.
B) Brine & Slow Rinse _____________________________ min.
C) Rapid Rinse ___________________________________ min.
D) Brine Tank Refill________________________________ min.
3) Drain Line Flow Control _____________________________ gpm
4) Brine Line Flow Controller ___________________________ gpm
5) Injector Size # ____________________________________
6) Service Valve Operation Units (SVO)
Size of Service Valve _______________________________