Watts S-FBV-1 - Manual

For Commercial and Industrial Applications
ES-S-FBV-1
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series S-FBV-1
2-Piece, Full Port, Stainless
Steel Ball Valves
Sizes: 1 ⁄
4
" – 3" (8 – 80mm)
Series S-FBV-1 2-Piece, Full Port, Stainless Steel Ball Valves
are suitable for a full range of liquids and gases. The S-FBV-1’s
full port orifice ensures maximum flow capacity, while rein-
forced PTFE seats, PTFE stem packing, thrust washer and
body seal provide maximum safety and high operating
pressure/temperature limits.
Features:
• Pressure rated at 1000psi (69 bar) WOG non-shock
and 125psi (8.6 bar) WSP
• Adjustable stem packing
• Bottom loaded, blowout proof stem
• Drilled and tapped mounting pads
• Standard Latch-Lok handle to lock in open or close position
• PTFE stem packing, thrust washer and body seal
• Reinforced PTFE seat
• Vinyl insulator on heavy duty 304SS handles
• Low operating torque
• Each valve factory tested
• Conforms to MSS-SP-110 and API-598
Specifications
A 2-piece full port stainless steel ball valve to be installed
as indicated on the plans. The valve must have an adjustable
stem packing, reinforced PTFE seats, PTFE stem packing,
thrust washer and body seal. Pressure rating no less than
1000psi (69 bar) WOG non-shock, 125psi (8.6 bar) WSP.
Valve must conform to MSS-SP-110. Valve shall be a Watts
Series S-FBV-1.
Pressure – Temperature
Temperature Range: 0˚F - 400˚F (-18˚C – 204˚C)
Maximum Working Pressure: 1000psi (69 bar) WOG
non-shock; 125psi (8.6 bar) WSP
S-FBV-1
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.