Blaupunkt RCR 45 User Manual

Page 11

Verona RCR 45

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Automatic tuning

Up
Down

Up/down in short intervals
(“AF” must be switched off)

To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).

Manual tuning << >>
(prerequisite: AF is switched off!)
•

Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.

When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.

Scrolling through the broad-
casting network (only FM)

You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of one broadcasting
network can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY (North German broad-
caster).
For this it is necessary that the stations have
been received at least once and that “AF” has
been activated before (lights up in the dis-
play).
For this purpose, you may start Travelstore
seek operation:
•

Press FM

for 2 seconds; the system

starts to run through the frequency
band.

If “AF” does not light up,
•

press AF.

With this, the requirements for selecting sta-
tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.

•

Press the FM

button as many times

until the desired memory bank lights up
in the display.

Storing stations

On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memory
banks I, II and T.
On MW/LW, you can store six stations each.
•

Select the waveband with FM

or M•L

and on FM also the desired memory
bank (with FM

•

Tune in a station with the rocker switch
(either automatically or manually).

•

Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confir-
med by beep).

Now the station has been stored.
The activated preset button is indicated in the
display.

Notice:
Should you tune in a station which has alrea-
dy been stored before, the corresponding
preset button and the memory bank will briefly
flash in the display if you have selected
another memory bank.