Operating adjustments, Addr, Chnd – Blizzard Lighting Vari White The Puck (Rev A) User Manual
Page 10: 5ch, 3ch, Slnd, Nast, Slau, Stby, Colo, Cool
Page 10
The Puck Vari White User Manual Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
NOTE: After making any adjustment, hold the
3 seconds, otherwise the fixture will return to the correct mode after approxi-
mately 10 seconds.
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
Addr
on the LED
Readout. Use the
choose a channel between
1
and
512
. Press
2.) To change between 2, 3 and 5 channel DMX mode, select
ChNd,
then press
5Ch, 3Ch,
or
2Ch
, then press
confirm.
Master/Slave Mode (Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX con-
nector on the rear of the units.
2.) Choose a unit to function as the Master. Select MAST. The master unit must
be the first unit. Finally, chain the units together using DMX cable.
Master
SLNd
then
NASt
to confirm.
3.) Select slave function by using the
the Master/Auto menu on the slave units, and they will react in the same as the
Master.
Slave
SLNd
then
SLAu
to confirm.
NOTE: Fixtures in slave mode will display “
STBY
“ (Standby). This is NORMAL.
Return the fixture to master mode to use it as a standalone fixture.
To set a custom color in Master/Slave/Standalone Mode:
Using this function, you can select any shade of white by adjusting the White and Warm
White values from 0-255 and also apply a strobe effect.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
To enter color mode, select
CoLo
from the menu panel and thenhit
firm. You can then adjust the following:
Cool White Level
CooL
then
000- 255,
Warm White Level
UArm
then
000- 255,
Strobe Speed
Stro
then
000- 255,