beautypg.com

Getting started, Page 3 – Blizzard Lighting Z19 Stiletto Zoom Moving Head User Manual

Page 3

background image

Page 3

Stiletto™ Z19 Beam Moving Head - Rev. B

(c) 2014 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x Stiletto™ Z19 Zoom Moving Head

• An Ever-So-Handy Power Cord

• A Sweet Safety Cable & set of Mounting Brackets

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on your purchase of the amazing Stiletto™ Z19 Zoom LED moving head.

With a name like Stiletto™ Z19 Zoom, its gotta razor cool! Now that you’ve got your

Stiletto™ Z19 Zoom (or hopefully, Stiletto’s!), you should carefully unpack the box and

check the contents to ensure that all parts are present and in good condition. If anything

looks as if it has been damaged in transit, notify the shipper immediately and keep the

packing material for inspection. Again, please save the carton and all packing materials.

If a fi xture must be returned to the factory, it is important that the fi xture be returned in

the original factory box and packing.

Powering Up!

All fi xtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fi xtures have a voltage select switch, so please verify that the

fi xture you receive is suitable for your local power supply. See the label on the fi xture or

refer to the fi xture’s specifi cations chart for more information. A fi xture’s listed current

rating is its average current draw under normal conditions. Check the fi xture or device

carefully to make sure that if a voltage selection switch exists that it is set to the correct

line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your fi xture may result if the line voltage applied

does not match the voltage indicated on the voltage selector switch. All fi xtures
must be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, please just visit our website at www.blizzardlighting.
com and open a support ticket. We’ll be happy to help, honest.
Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Disclaimer: The information and specifi cations contained in this document are subject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any

errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the

right to update the existing document or to create a new document to correct any errors

or omissions at any time. You can download the latest version of this document from

www.blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Henry

9/29/2014

J. Henry

11/05/2014