Blizzard Lighting Quadra ProPar (Rev B) - Manual (Page 12)

Page 12
ProPar Quarda LED Manual Rev. B Copyright (c) 2012 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The ROCKLITE RGBA is capable of operating with either 4 or 8 DMX channels.
To use the fi xture in 4-channel mode, use the
d001
on the LED Readout.
2.) To operate the fi xture in 8-channel mode, use the
A001
on the LED Readout.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fi xture in Flash/Fade mode, select
FF01-FF99
(Fade Mode,
slowest to fastest) or
CC01-CC99
To confi rm, press the button.
2.) To use the fi xture in demo mode, select
dEoo
, then press the
button to confi rm.
3.) Each fi xture is a master by default. To set the fi xture as a slave, use the
SLAv,
then press the button to confi rm.
Sound Acitve Mode:
1.) To use sound active mode, select either
SouD
.
2.) Press the button to confi rm.
Manual Mode (Color Preset Mode):
Allows a single unit to display a variety of colors without a DMX controller.
1.) Reach the manual adjustment by using the
b001
.
Adjust each color by using the , and buttons to se-
lect
r001-r255
,
g001-g255
,
b001-b255
or
u001-u255
(Red,
Green, Blue and Amber, respectively), and adjusting between 1 (lowest) and 255
(highest) for each color.
To confi rm, press the button.