Bausch & Lomb Boston Simplus - Manual

Description: A sterile, aqueous, buffered solution that contains poloxamine,
hydroxyalkylphosphonate, boric acid, sodium borate, sodium chloride,
hydroxypropylmethyl cellulose, Glucam and preserved with chlorhexidine
gluconate (0.003%), polyaminopropyl biguanide (0.0005%).
Actions: This solution removes protein and lipids from the lens surface and
also helps keep stubborn deposits away from lenses. This solution is also
designed for rinsing lenses, which eliminates loosened surface deposits
from the lens. A multi-polymer cushioning system conditions the lens to
provide cushioning upon insertion. A patented humectant maintains lens
wettability. This formula is designed to provide a soothing effect to your
eyes. It also contains a preservative system proven effective in destroying
harmful organisms. This solution is effective both in cleaning and
disinfecting, yet is compatible with the eye upon lens insertion.
Indications: For cleaning, removing protein, rinsing, disinfecting,
conditioning, storing and cushioning fluoro silicone acrylate and silicone
acrylate rigid gas permeable contact lenses.
Contraindications: Do not use this solution if you are allergic to any ingredient
in this product. Not For Use With Soft (Hydrophilic) Contact Lenses.
Warnings: To avoid contamination, never touch dropper tip of the container
with your hands or to any surface. Keep bottle tightly closed when not in use.
Contact lenses and solutions, if not handled properly, can become contaminated
by common bacteria known to cause ocular infections. Serious damage to the
eye and loss of vision may result from using contaminated solutions or from
wearing contaminated or damaged contact lenses.
PROBLEMS WITH CONTACT LENSES AND LENS CARE PRODUCTS COULD
RESULT IN SERIOUS INJURY TO YOUR EYES. It is essential that you
follow your eye care professional’s directions and all labeling
instructions for proper use of your lenses and lens care products.
EYE PROBLEMS, INCLUDING CORNEAL ULCERS CAN DEVELOP RAPIDLY
AND LEAD TO LOSS OF VISION. THEREFORE, IF YOU EXPERIENCE EYE
DISCOMFORT, EXCESSIVE TEARING, VISION CHANGES OR REDNESS OF
THE EYES, IMMEDIATELY REMOVE YOUR LENSES AND PROMPTLY
CONTACT YOUR EYE CARE PRACTITIONER.
Precautions: To ensure proper hygiene and handling of contact lenses and
contact lens solutions, always follow label directions carefully.
• Never reuse this solution.
• Always use fresh solution for soaking and storing lenses.
• Always wash your hands before handling your lenses.
• Store solutions at room temperature. Avoid freezing.
• After inserting your lenses, always thoroughly clean the interior of the
lens case with hot water and air dry after each use.
• Use before expiration date on the container.
• ALWAYS RINSE LENSES WITH BOSTON SIMPLUS MULTI-ACTION
SOLUTION AFTER CLEANING TO ELIMINATE LOOSENED SURFACE
DEPOSITS.
• KEEP OUT OF THE REACH OF CHILDREN.
Adverse Effects: The following problems may occur:
• Eyes stinging, burning, itching (irritation)
• Excessive watering (tearing) of the eyes
• Unusual eye secretions
• Redness of the eyes
• Reduced sharpness of vision (visual quality)
• Blurred vision
• Sensitivity to light (photophobia)
• Dry eyes
If you notice any of the above conditions, immediately remove and examine
the lenses. If the problem stops and the lenses appear to be undamaged,
thoroughly clean, rinse and disinfect the lenses and reinsert. If the problem
continues or if a lens appears to be damaged, DO NOT REINSERT. Contact
your eye care professional immediately. If any of the above problems occur,
a serious condition such as infection, corneal ulcer, neovascularization or
iritis may be present. Seek immediate professional identification of the
problem and treatment to avoid serious eye damage.
DIRECTIONS FOR USE
To ensure proper disinfecting, all steps listed below must be followed:
1. Wash your hands with mild soap. (Caution - pump soaps
may contain oil-based suspension agents.)
Place lenses in empty lens case and fill with fresh Boston
SIMPLUS Multi-Action Solution. Soak lenses for at least
four (4) hours (or overnight) before wearing.
Wash hands with mild soap before cleaning (rubbing) lenses.
After soaking, remove lenses from lens case and rub both sides
of the lenses carefully with four (4) drops of Boston SIMPLUS
Multi-Action Solution in the palm of your hand for twenty (20)
seconds. NO SEPARATE DAILY CLEANER IS REQUIRED.
Rinse for approximately five (5) seconds with a steady
stream of Boston SIMPLUS Multi-Action Solution to
eliminate loosened surface deposits and insert lenses.
2.
3.
4.
5. Thoroughly clean interior of lens case with hot water and air dry after each use.
6. Discard solution ninety (90) days after opening. Record date opened in space
provided on bottle label. Note: When used daily, this solution will be depleted
before ninety (90) days.
• For lens rewetting and lubrication, use Boston® Rewetting Drops
• Lens cases should be replaced frequently to avoid potential microbial
contamination and ocular irritation.
How Supplied: Boston SIMPLUS Multi-Action Solution is supplied sterile in 3 fluid ounce
(90 mL) and 3.5 fluid ounce (105 mL) bottles. All retail Boston® Solutions are packed in
unit cartons. Bottles are sealed with an imprinted neckband and marked with a lot number
and expiration date. Do not use if imprinted neckband on bottle is missing or broken.
© Polymer Technology, a Bausch & Lomb company
Made in USA 4/03
Manufactured for:
Polymer Technology,
a Bausch & Lomb company,
Rochester, NY 14609
Questions or Comments:
1-800-333-4730
www.bausch.com
Boston SIMPLUS TM Multi-Action Solution
For Cleaning, Removing Protein, Rinsing, Disinfecting and Conditioning
Fluoro Silicone Acrylate and Silicone Acrylate Rigid Gas Permeable
Contact Lenses
IMPORTANT: Please read carefully and keep this information for future use.