3D Robotics Video/OSD Kit - Manual

VIDEO/OSD KIT
Attach camera mount
MinimOSD board
Digital video camera
Position mount over bottom of camera and attach through the two small holes
on either side with the small screws. This will allow you to mount the camera to
your vehicle and adjust the angle of view.
Camera mount with two
screws plus two spares
AV transmitter
AV receiver
Two antennas
Two 900 mAh
LiPo batteries
Transmitter cables
OSD cables
Receiver cables
Thank you for purchasing a OSD/FPV Kit from 3D Robotics!
Your new, lightweight video setup allows you to capture onboard video from your
vehicle using a compact camera, overlay the video with important data from your
autopilot, and transmit the video in flight. This kit does not include a device to view
your video. Please see the section on page 7 for different options for viewing
the video transmitted by your kit.
Battery charger
adapter