Waring Pro DF55 - Manual (Page 3)

3 4
8. DO NOT use any solid/hydrogenated oil, olive oil,
grapeseed oil, shortening or lard in this deep fryer. DO NOT
MIX OILS as they may have different smoke points. USE
GOOD QUALITY oil that has a smoke point of 400˚F or
higher.
CAUTION: To prevent damage to countertop or tabletop
finish, use a nonflammable, heat-resistant coaster or placemat
between the appliance and the countertop or tabletop surface.
Never place on carpet, furniture, or other combustible materials.
PARTS
1. Lid with Handle
2. Basket with
Collapsible Handle
3. Heating Element
4. Power ON
Indicator Light
5. Oil Ready
Indicator Light
6. 2 Qt. Enamel
Coated Oil
Container with
Pouring Spout
7. Brushed Stainless
Steel Body
8. Reset Button
Breakaway Cord and Polarized Plug
This appliance features a breakaway cord
and polarized plug (one blade is wider
than the other). The breakaway cord is
designed to quickly disconnect from the
appliance when a pulling force is applied.
NOTE: The breakaway cord can fit into
the appliance in only one direction. Please
refer to printing on the cord connector
that states “this side up.” To reduce the
risk of electric shock, a polarized plug is
featured. This plug is intended to fit only
into a polarized outlet. If the plug does not
fit into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any
manner.
SHORT CORD INSTRUCTIONS
CAUTION: A short power supply cord is provided to reduce the
risk of personal injury resulting from becoming entangled in or
tripping over a long cord.
EXTENSION CORD USE
An extension cord or longer detachable cord is not
recommended for use with deep-fat fryers.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances,
your appliance may not operate. It should be operated on an
electrical circuit that is free from other appliances. If you are
not sure of the reason for overloading or cannot find a separate
circuit, contact a qualified electrician.
This appliance is for 120 volts only and should not be used with
a converter.