Waring Pro MG1200 - Manual (Page 6)

6
5. Place a wide, shallow bowl or plate beneath the grinder tube to
catch food.
6. Switch appliance to GRIND or SAUSAGE position. The
appliance must always be in GRIND or SAUSAGE position
before adding food.
7. Place food on the large die-cast hopper and use pusher to
feed food through opening.
OPERATING INSTRUCTIONS
1. Attach grinder/feeder head to
motor unit. Fit grinder/feeder
head tightly into attachment
opening. Tighten the locking
knob by turning it clockwise.
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed
screw is fully inserted or
cutting blade will not fit.
4. Place the cutting plate in
the grinder/feeder head.
3. Attach cutting blade to the
end of the feed screw. Make
sure the cutting edge (flat
side) of the blade is facing out.
5. Tighten screw ring onto the
grinder/feeder head.